|
PS/55 model numbering
Some models of PS/55s are described as xxx0
and at the same time these models are also described as xxx1.
For example, model "5551" is sometimes called as "5550", "5561"
is called as "5560" and so on.
What is the trick ( or logic whatever ) there ? I am not
sure about the logic or trick.
I may use 5551 in some case and I may use 5550 in another occasion.
So please don't think these
are different models.
Model 5530, 5510, 5580 These all do not have xxx1 number.
They are always described as xxx0 .
On the other hand, 5550, 5570, 5560, 5540 these models have xxx1 number
with specific type-suffix. ( Recently I noticed that 5560-N
has also 5561 number with type suffix ).
Really strange.... . There is NO 5520 number for model 5521-Y.
Wild assumption for 0 and 1 and model coding.
During email transaction with Mr. Tahara who knows a lot about
IBM Multistation 5550 series We reached following assumption about numbering
of PS/55.
Model numbers of Multistation series and PS/55.
Fact #1 : 5550, 5540, 5530, 5560 had been used for Multistation
series.
IBM used same numbers for new series.
"55" in PS/55 was took after Multistation "55xx".
Fact #2 : Different alphabet indicating
CPU speed were given to new models.
Fact #3 : IBM Multistation 5550 had been
consisted with following units and xxx1 was already
used for indicating PC unit.
5551: PC unit with various type suffix code began in A to P.
5553: Printer
5555: Display
5556: Keyboard
5557: Printer
5559: Expansion unit.
Fact #4 : Model 5530 which was defined as "Entry
class" had no xxx1 number for Multistation.
PS/55 5530 also doesn't have xxx1 number.
PS/55 5510 defined as " Entry model " doesn't have xxx1 number.
Coding rule for PS/55 should be;
xxx0 was used as general number indicating "system" as a whole and
at the same time it was used as model number.
On the other hand xxx1 was used for PC unit ( with type suffix consisted
with combination of alphabet and numeric ).
The rule might be explained as follows.
For desktop models ( Including tower model 5570 )
| 55x0 |
Stands for model number such as "Model 5550", Model
5560", "Model 5570", " Model 5540". |
| 55x1 |
Number xxx1 is used to describe each specific model-type
with suffix indicating CPU, memory, drive arrangement and installed
OS and so on |
Server model ( 5580 )
Server model was a *new* segment which had not been available in Multistation
series.
They no need to follow existing numbering rule. Thus 5580 was always 5580
like 9595 and 9585/8595.
Entry class machine
Figure 1 to 3 for 3rd digit ( xxNx ) was kept for *Entry class machine
such as xx10, xx20 and xx30. xxx1 was not used for *Entry
class* machines. Model 5510 and 5530 has no xxx1 number even for any specific
types. Exception was xx20 for 5521-Y.
5521-Y
The last desktop model derived from 5550-R/L ( same body, almost same planar
).
This model was also described as "Entry model" when they were introduced.
The 3rd digit left unused for entry class machine between "1" to "3" was 2
( "1" was used for 5510-S/Z/T, "3" was used for 5530-T/Z ).
Thus 552x was left for the model. But the model
was actually a model 5550 486 family. 5550 should be a root number for this
system. So IBM might give "5521" for it but not 5520.
Why it was not coded as 5551-xxx then ?
According to PS/55 coding, 486 model were coded as ;
N : DX2/66 IML
Y : DX/SX33
R : DX2/66 IDE,
L : BL2/66
W : DX/SX25
Y should be suitable for i486SX/33 but 5551-Y was already marketed .
Alphabet left unused were "I", "O", "P", "Q", "X" and
"Z" . IBM din' t use "I", "O" and "Q" because
these alphabet might cause confusion between alphabets and numeric
"X" and "Z " were supposed to be suitable for "High end" (or Ultimate )machines
but not for Entry level machine and these letters might be kept for future
coming models. And anyway it has 486SX33 for which "Y"
was defined. Thus IBM had no choice but name it as 5521-Y.
|
|
Hmm.... confusing.
Anyway nobody cares for such story these days.
We are now in GHz era .
PS/55 Index
|